Price:	QTY:
Pond One Claritec 10000       Pond One ClariTec 10000 Pressurized Filter          Solid construction ClariTec from Pond One is a pressurised pond filter with a real feel of quality. The Construction is solid and the media content is effective. Designed to withstand pressures of up to 0.5 bar the ClariTec can be hidden in the ground beside the pond and then return the filtered pond water back via a waterfall if desired.           Your Guide to Sizing Claritec Filters to Your Requirements   Claritec Filter Model Max Pond Size Suggested Stock Level 1 Stock Level 2 Stock Level 3 3000 3000 1500 750 5000 5000 2500 1250 10000 10000 5000 2500 15000 15000 7500 4000   Stock Level 1: Ormamental pond with plants and few fish and less than average (6 hours) exposure to full sunlight per day in cooler climates or shaded ponds. Stock Level 2: Typical pond with plants and average fish contents and average sun exposure. Stock Level 3: Heavily stocked pond with plants and larger fish or greater than average sun exposure. This is a more realistic match for most Australian conditions.   Technical Specifications   Model Height Diameter Volume UVC Fittings Cable Length 3000 360mm 330mm 16.5L no 3/4"-1.5" 10m 3000UV 360mm 330mm 16.5L 9W 3/4"-1.5" 10m 5000 460mm 330mm 21.5L no 3/4"-1.5" 10m 5000UV 460mm 330mm 21.5L 9W 3/4"-1.5" 10m 10000 560mm 330mm 27.5L no 3/4"-1.5" 10m 10000UV 560mm 330mm 27.5L 13W 3/4"-1.5" 10m 15000 660mm 330mm 33.5L no 3/4"-1.5" 10m 15000UV 660mm 330mm 33.5L 13W 3/4"-1.5" 10m     All Pond One ClariTec Pressurized Filters clean themselves with a turn of the dial.       The integrated back flow system can be activated by the control dial. This reverses the flow and washes out most sediment and debris which has built up over time. A hose pipe can be connected to the 'waste' outlet to take the dirt away from the filter to the drain or the garden. The big advantage of this type of cleaning is that the "kill" off of beneficial bacteria during the cleaning process is significantly reduced since you do not have to remove the filter media. This level of cleaning is all that is normally required. Occasionally more thorough cleaning will become necessary. Simply flick the safety catch on the sealing clamp and the chunky release mechanism can be opened. The filter head can then be removed and the media washed out.